Page 1
ANGGUN USER MANUAL Please read before operating your new bicycle. e-JOE Bike, Inc. Phone: 855-888-1891 E-Mail: sales@ejoebike.com Website: http://ejoebike.net...
Introduction .................................... 3 Warranty ....................................4 Opening Your Bicycle ................................5 Structure of your new Electric Bicycle ............................ 6 Main Specifications: ANGGUN ..............................7 Brakes....................................12 Brake Precautions ................................12 Gears ..................................... 17 Seat and Handlebar Safe Height Mark..........................13 Vertical Handle Stem Position (Handlebars)........................
Even a very small amount of alcohol will limit your ability to be safe on the road. When you need to replace your battery, please either dispose it properly or send it back to us or your retailer and we will make sure it is properly recycled. Happy cycling! Your friends at e-JOE Bike...
LIMITED 30 DAYS FULL REPLACEMENT WARRANTY If an e-JOE bicycle is not working properly because of a major defect within the first 30 days, e-JOE Bike, Inc. will repair or replace any defective e-JOE Bicycle at its sole option and expense upon determining whether the damage, failure, or loss is due to a major defect.
Front and rear LED lights Pedals (2) Battery charger- in a separate box Mini tool kit for assembly and/or repairs Keys (2) Please contact your dealer or e-JOE Bicycle if any of these parts are missing.
Structure of your new Electric Bicycle Currently electric bicycles can be divided into two classes: TAG (Twist And Go) and PAS (Pedal Assistance System). The ANGGUN belongs in the PAS classification. Refer to the picture below for structure and parts.
Main Specifications: ANGGUN Bike Weight 55 lb Max Capacity 300 lb Dimension 59.5 x 10 x 26 in Max speed 20 mph Full charge up to 60 mi distance Climbing grade ≤10% grade Motor Description 350W Rated Peak 530W Brushless Geared Hub Motor Max riding noise ≤...
Assembly Necessary Tools 5 mm Allen Key, 6 mm Allen Key, 15 mm Wrench Step 1: Handlebars Stand the main body of the electric bike on the kickstand. Insert the stem of the handlebar sub-assembly into the steering column that is at the front of the main body frame.
applying the brake you need to readjust by increasing or decreasing the clearance between the brake pads and the wheel. General Operating Instructions Before You Ride for the First Time: Check that the handlebar and handlebar stem are properly tightened ...
Using the Kickstand The ANGGUN is equipped with a stabilizing kickstand that aims to support both sides of the bicycle. Secure the Bicycle for Kickstand Maneuvering Place one hand on handlebar and the other on the seat to stabilize the bicycle...
Page 11
Putting the Kickstand Down Place foot in front Guide the kickstand of the kickstand upward towards slightly tilting the the back of the bicycle away from bicycle your body Putting the Kickstand Up Guide the kickstand Plant foot on top of downward in a the portion of the clockwise motion...
Brakes There are two types of braking mechanisms that e-JOE installs on its electronic bicycles, the “V-brake,” and “Disc brake.” The ANGGUN has Disc brakes installed on both the rear and front tires, as shown in the picture below: V-brake...
Seat and Handlebar Safe Height Mark Vertical Handle Stem Position (H andlebars) Appropriate adjustments can be made for the vertical handle stem according to personal preference or driving habit, but it is forbidden to expose the infix notation (also called, the safety line, as shown in Fig.1). If used in an inappropriate way, it may cause serious injury to the rider.
Page 14
height of seat. Putting the seat above the line will cause the seat post to bend when applying downward pressure. Bending of the post due to improper usage is not covered under warranty.
LCD Screen Charge Level Indicators Charger Indicator The battery charger for the ANGGUN is equipped with an LED light indicator that works to help you preserve the battery life of your bicycle by allowing you to quickly see if your ANGGUN is completely charged.
Do not use any other charger other than the one that came with your electric bike. If you need another charger, contact your local dealer or e-JOE Bicycle. Do not attempt to open or repair your charger. The electronics contain high pressure circuits, so do not dismantle it by yourself.
Gears The ANGGUN comes with seven (7) gears. To move to a higher gear, press the button on the right side of the handle bar with the + symbol on it. To switch to a lower gear, press the lever with the upward arrow symbol that is adjacent to the gear display outward towards the front of the bike.
Maintenance 1. IMPORTANT! Do not attempt to open the casings of the battery, motor, or controller. It could be dangerous and will void any warranties. If you experience any problem, please contact our service department or your retailer. 2. Wheel spokes should be adjusted every 300 miles of riding. 3.
Simple Troubleshooting Problems Solutions A. Top speed too slow Fully recharge battery B. Power on but motor not working 1. Re-install battery/ Replace fuse C. Driving shorter distance per 1. Check tire pressure recharge 2. Recharge completely or have charger re-inspected 3.
Contact Us We thoroughly hope you enjoy your new e-JOE bike! If you have questions/comments/concerns, or would like to share your e-JOE bike experience with us, please contact us at: Telephone: 855-888-1891 E-Mail: sales@ejoebike.com Website: http://www.ejoebike.net Like us on Facebook!
Need help?
Do you have a question about the ANGGUN and is the answer not in the manual?
Questions and answers