F.A.G. SRL
ME-CPT1-199
4.B. INTERNAL CLEANING & SANITIZING
CAUTION ! : DO NOT MIX CLEANER AND SANITIZING SOLUTION TOGETHER
WARNING ! WEAR RUBBER GLOVES AND SAFETY GOGGLES WHEN HANDLING
4.B.a. Cleaning - To remove lime scale or other mineral deposits
1. Disconnect power and remove front panel and, for easier operation, top panel and door.
2. Discard all the ice present in the ice bin.
3. To drain water tank, remove water blinds and ice chute and gently remove the moving part of the
overflow regulator (fig. 4.B.1).
4. To clean tank and water system, add an approved liquid ice machine cleaner to water tank
following the directions of the manufacturer of the product.
Otherwise you can pour two spoons of vinegar or citric acid in the water tank.
5. Re-place all items removed (overflow regulator, spray bar, ice chute and water blinds) and start
the unit with the Timer in defrost position. Fresh water will be charged.
6. Leave the unit work for some producing cycles.
7. To rinse, place the Timer in defrost position allowing fresh water in. To drain water follow
instructions as per #3.
8. To clean ice bin discard the ice produced and gently rub sides and bottom of the bin with a cloth
using the same cleaning solution.
For a more thorough cleaning you can remove spray bars, ice chute and water blinds and clean them
separately.
fig. 4.B.2
ICE MACHINE CLEANER OR SANITIZER
water tank
rubber hose
spray bar
SELF CONTAINED UNITS WITH TIMER
COMPACT SERVICE MANUAL
fig. 4.B.1
ice chute
water blinds
PAG.12
Need help?
Do you have a question about the CP 30SC E and is the answer not in the manual?