Panasonic NV-GS6EE Service Manual page 47

GS6EE / NV-GS6GC / NV-GS17E / NV-GS17EB / NV-GS17EF / NV-GS17EG / NV-GS17EP / NV-GS18E / NV-GS21E / NV-GS21EB / NV-GS21EG / NV-GS21EK / NV-GS21EP / NV-GS25GC / NV-GS25GN / NV-
28GK / NV-GS35E / NV-GS35EB / NV-GS35EG / NV-GS35EP / NV-GS35GC / NV-GS35GN / NV-GS38GK
7. Installation of Main C.B.A.
Take care not to damage the F.P.C.s.
1) Connect the Zoom Switch F.P.C. to the Connector
FP10 on the Main C.B.A.
2) Connect the F.P.C.s to the connectors on the Main
C.B.A, verifying that the direction of the Flexible Cables
is correct. Refer to "REMOVAL/INSTALLATION OF
F.P.C. FROM NON ZIF (Zero Insertion Force)
CONNECTOR."
3) After installing the Main C.B.A., confirm the F.P.C.s are
positioned as shown.
Head
Amp
Mechanism
F.P.C. F.P.C.
Cylinder
Sub Mechanism Capstan
F.P.C.
F.P.C.
F.P.C.
Fig. D7
8. Installation of Mechanism Chassis Ass'y
Take care not to damage the F.P.C.s.
1) After installing the Mechanism Chassis Ass'y, confirm
the F.P.C.s are positioned as shown.
Zoom
Switch
F.P.C.
Mechanism Chassis Ass'y
Replacement of Mechanism Chassis Ass'y
When replacing the Main Chassis Ass'y or the Cylinder
Unit, be sure to perform the Envelope Output Adjustment.
Refer to "ENVELOPE OUTPUT ADJUSTMENT" in
MECHANICAL ADJUSTMENT.
Handling Caution of Mechanism Chassis Ass'y
When servicing the Mechanism Chassis Ass'y without the
Cassette Up Unit, do not handle the Sub Chassis of the
Mechanism Chassis Ass'y.
Sub Chassis
Sub Chassis
47
Fig. D8-1
Mechanism Chassis Ass'y
(without Cassette Up Unit)
Sub Chassis
<Side View>
Fig. D8-2