36 en | Maintenance
12.7
Resetting the HTS50 to its factory defaults
CAUTION! This function deletes all of the settings programmed
!
by the user. The unit is reset to its factory defaults.
To reset the HTS50 to its factory defaults,
The unit announces: Set-up reset.
The unit is now ready for language selection.
13
Maintenance
Check the unit housing for damage such as cracks or chips.
Test the functions of the keys and check that the spaces in
between the keys are clean. If necessary, remove the keys from
the housing cover and clean them.
The backup battery of the HTS unit should be replaced every
3 years. Regularly check the cords for damage, especially close
to cable guides/channels and sockets.
14
Conformity
All connected parts must meet the electric strength of TNV3,
DIN EN 60950.
The Carephone HTS50 is designed for operation on the public
analogue telephone network.
The RF transmitter that is supplied with the unit uses the
frequency specially reserved for social alarm calls in Europe.
We, Bosch Security Systems, declare that the above mentioned
products are manufactured in compliance with Annex II
(Telephony) / IV (RF Transmission) of Directive 5/1999/EC.
Conformity with EU Directive 5/1999/EC is assured:
CE (R&TTE 1999/5/EC, LVD 73/23/EEC, EMC 89/336/EEC).
ISA-50-MS V2 I 2008.02
press the P and R keys together for at least two seconds.
User Manual
Carephone 50
Bosch Security Systems