Bosch Carephone 50 ISA-50-MS User And Programming Manua page 35

Carephone 50
91-99 Registering RF detectors
Up to 10 RF detectors can be registered with a code number that
is stored in the button itself. These code numbers must be
stored in the HTS50. Only the code number of the 1st RF
transmitter is stored when the product leaves the factory.
To register more RF detectors,
1.
1.
2.
3.
4.
The second RF transmitter is now stored in the HTS50. The HTS
advances to programming step 93, and additional RF detectors
can now be registered.
NOTE! After programming step 99 the unit advances to
programming step 90.
NOTE! Make a note of the code numbers in the corresponding
box in the programming table, see Section 18.2 Programming
Tables, Page 42.
WARNING! Resetting the unit will delete all registered
RF detectors.
Bosch Security Systems
Select programming step 92.
HTS50: Selection 92 is...
Press the corresponding RF transmitter.
HTS50: Selection 92 is...
Press C to confirm.
User Manual
Programming | en 35
ISA-50-MS V2 I 2008.02