Pro-Form 700 ZLT PETL80910.0 User Manual page 20

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
adjust console settings.
To select the information mode, hold down the Stop
button, insert the key into the console, and then re-
lease the Stop button. When the information mode is
selected, the following information will appear in the
display:
The lower left
corner of the
display will show
the number of
hours that the
treadmill has
been operated.
The lower right
corner of the
display will show the total number of miles or kilome-
ters that the walking belt has moved.
An E for English miles or an M for metric kilometers
will appear in the display. To change the unit of mea-
surement, press the Speed increase button.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a "d" will ap-
pear in the lower right corner of the display while the
information mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
You can select an audio setting for your personal
trainer if desired. When you use an iFit card, a per-
sonal trainer will guide you through your workouts. To
turn on or turn off the voice of the personal trainer,
press the Incline decrease button. The word ON or
OFF will appear in the display.
The volume level will appear in the upper right corner
of the display. To adjust the volume level, press the
Incline increase button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack. Then, plug the audio wire into a
jack on your MP3 player, CD player, or other personal
audio player. Make sure that the audio wire is fully
inserted.
Next, press the Play
button on your MP3
player, CD player, or
other personal audio
player. Adjust the vol-
ume on your personal
audio player or with the
Vol increase and de-
crease buttons on the console. Note: If the volume
cannot be turned up, make sure the volume level is not
set at 0 (see THE INFORMATION MODE on this
page).
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation as it tracks your heart rate during your workouts.
To purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.
20
Volume Increase
Volume Decrease