Table of Contents
Advertisement
2 Installation and Setup
2.3 GigE Connections and Software Installation
This section is a quick reference for installing the SK91GigE-WIN software package and to set up the Gigabit
Ethernet network adapter. For detailed information see the SK91GigE-WIN manual.
Step 1: Install Sk91GigE-WIN from CD
Step 2: If the Gigabit network interface controller
(NIC) has an INTEL PRO/1000 chip then
install the High Performance Driver
SK91GigE-WIN Installation
Power on the PC (not the camera) and insert the SK91GigE-WIN CD to the disk drive.
The autostart function will launch the setup program automatically. If it is deactivated, start the setup.exe in the root
folder of the CD manually. Basically the Schäfter + Kirchhoff SkLineScan-GigE camera control and adjustment tool
as well as the Pleora Network Driver Installation Tool will be installed.
Network Driver Installation
High Performance Driver for Intel PRO/1000 Chip
If the line scan camera is connected to a network interface card (NIC) with Intel PRO/1000 chip, then
•
install the "High Performance IP Device Driver". This is the recommended system configuration for
optimum performance.
Open the program menue
installation manually:
For 64-bit operating systems choose
•
"Driver Installation x64".
•
For 32-bit systems (Windows 7 32-bit, XP) use
"Driver Installation x86".
The eBUS driver installation tool window
to list the available network adapters and the currently
installed network drivers in the system.
B
Plug in the CAT6 network cable to the camera and switch on the power supply. Then restart the system and check
the driver installation with the driver installation tool
C
The High-Performance driver is installed, further network adjustments are not required.
© 2015
Schäfter + Kirchhoff GmbH • Hamburg
and start the network driver
A
will show up
B
SK6288GKOC-L Instruction Manual (06.2015)
Step 3: Plug in the CAT6 network cable to the
camera and switch on the power supply.
Step 4: Check the network connection.
Step 5: Start the SkLineScan program.
A
Starting camera eBUS driver installation tool
.
C
9
Advertisement
Table of Contents
