Table of Contents
Advertisement
2 Installation and Setup
2 Installation and Setup
2.1 Mechanical Installation: Mounting Options and Dimensions
Mounting Options
•
The best fixing point of the camera is the seat for
the mounting bracket SK5105-L, which is available
as an accessory.
•
Four threaded holes M3 x 6.5 mm provide further
options for customized brackets.
•
The length and weight of the optics might be beyond
the capability of the standard mounting bracket
SK5105-L. For this purpose, a second mounting
bracket type SK5105-2L to hold the tube extension
ring(s) is more appropriate.
Casing type BG3
Mounting bracket SK5105-L
Clamping set SK5101
Set of 4 pcs. clamping claws
incl. screws
Mounting system SK5105-2L
for cameras with a tube
extension > 52 mm
© 2015
Schäfter + Kirchhoff GmbH • Hamburg
Optics Handling
•
If the camera and the optics are ordered as a kit,
the components are pre-assembled and shipped
as one unit. Keep the protective cap on the lens
until the mechanical installation is finished.
•
If you must handle with an open sensor or lens
surface, make sure the environment is as dust-free
as possible.
•
Blow off loose particles using clean compressed air.
•
The sensor and lens surfaces can be cleaned with
a soft tissue moistened with water or a water-based
glass cleaner.
BG3
Lens mount:
Seat for bracket:
Flange focal length:
65
M45x0.75
Pixel 1
M3 (4x)
depth 6.5 mm
Clamping claw
Hex socket head screw
DIN 912–M3 x 12
SK6288GKOC-L Instruction Manual (06.2015)
M45x0.75
Ø47.5 mm
FFL = 19.5 mm
72.4
4 25.1
2.5
6
12.7
CCD-Sensor
FFL
66
M3
Ø 3.3
36
6.5
Ø 4.3
6
3.5
36
10 10
6
50
20 16.5
3.5
15
M4
70
31.5
25 10
3.5
M4
Ø4.3
7
Advertisement
Table of Contents
