Table of Contents
Advertisement
How to Use this Instruction Manual
!
Please read the following sections of this Instruction Manual before unpacking,
assembly or use of the Line Camera System:
• The safety warnings on this page
• Introduction to the system, page 4
• Assembly and initial setup, page 7
Keep this Instruction Manual in a safe place for future reference.
Safety Warnings
Electricity Warning
Assembly and initial operation of the line scan camera must be carried out
under dry conditions.
Do not operate the camera if you notice any condensation or moisture in
order to avoid danger of a short circuit or static discharge!
For typical use in a scanning application, please consider the following
warnings:
Mechanical Warning
Ensure that the scanner axis is free to move and that no obstacles are in the way
especially fingers!
–
Do not place any body parts in the way of moving parts!
Risk of High Power Lighting
According to the application laser or high power LED light sources might be
used. These can affect your eyesight temporarily or even cause permanent da-
mage to the eyes or skin.
Do not look directly into the light beam!
2
SK6288GKOC-L Instruction Manual (06.2015)
© 2015
Schäfter + Kirchhoff GmbH • Hamburg
Advertisement
Table of Contents
