Table of Contents
Advertisement
CE-Conformity
The product complies with the following standards and
directives:
2004/108/EG
EMC Directive
DIN EN 61326-1:2013
Electrical equipment for measurement, control and
laboratory use – EMC requirements
Part 1: General requirements
Part 2-3: Particular requirements – Test configuration,
operational conditions and performance criteria for
transducers with integrated or remote signal
conditioning
Copyright ©
Unless explicitly allowed, the duplication, distribution, sale or use of this document or its contents, for purposes
other than those intended, is forbidden. Repeated transgressions will lead to prosecution and demands for
compensation.
All rights of patent protection and registration or copyright of a product or its design lie with Schäfter+Kirchhoff.
Schäfter+Kirchhoff GmbH and the Schäfter+Kirchhoff logo are registered trademarks.
We reserve the right to improve or change specifications so that the system description and depictions in the
Instruction Manual may differ in detail from the system actually supplied. The Instruction Manual is not covered
by an update service.
Date of document publication: 03.06.2015
Schäfter+Kirchhoff GmbH
Kieler Straße 212
22525 Hamburg
Germany
© 2015
Schäfter + Kirchhoff GmbH • Hamburg
Warranty
This manual has been prepared and reviewed as carefully
as possible but no warranty is given or implied for any
errors of fact or in interpretation that may arise. If an error
is suspected then the reader is kindly requested to inform
us for appropriate action.
The circuits, descriptions and tables may be subject to
and are not meant to infringe upon the rights of a third
party and are provided for informational purposes only.
The technical descriptions are general in nature and
apply only to an assembly group. A particular feature set,
as well as its suitability for a particular purpose, is not
guaranteed.
Each product is subjected to a quality control process. If
a failure should occur then please contact the supplier or
Schäfter + Kirchhoff GmbH immediately. The warranty
period covers the 24 months from the delivery date. After
the warranty has expired, the manufacturer guarantees
an additional 6 months warranty for all repaired or substi-
tuted product components. Warranty does not apply to
any damage resulting from misuse, inappropriate modifi-
cation or neglect. The warranty also expires if the product
is opened. The manufacturer is not liable for conse-
quential damage. If a failure occurs during the warranty
period then the product will be replaced, calibrated or
repaired without further charge. Freight costs must be
paid by the sender. The manufacturer reserves the right
to exchange components of the product instead of
making a repair. If the failure results from misuse or
neglect then the user must pay for the repair. A cost
estimate can be provided beforehand.
Tel.: +49 40 853 997-0
Fax: +49 40 853 997-10
Email: info@SuKHamburg.de
Internet: www.SuKHamburg.com
SK6288GKOC-L Instruction Manual (06.2015)
31
Advertisement
Table of Contents
