Modifying The Flash Duration (Key «R»); Modifying The Dialling Mode; Defining Forbidden Prefixes - Call Barring - SAGEMCOM C112 ECO User Manual

M
ODIFYING THE FLASH DURATION
If you connect your telephone to a private automatic branch
exchange, or if you have an enquiry call service (operator
service), you may have to modify the duration of the flash, which
is set to 100 milliseconds by default.
If you have to modify the duration of flashing, proceed as follows :
• Go to Phone setting / Set flash
• Select your desired
keys or .
The duration is modified
Press the key to confirm.
M
ODIFYING THE DIALLING MODE
If your telephone is connected to an old PABX, you may have to
modify the dialling mode.
The default dialling mode is tone.
26
(K «R»)
EY
time.
flash duration using
directly on the screen.
• Go to Phone setting / Dialing
• Modify the dialling mode using keys
Press to confirm.
D
EFINING FORBIDDEN PREFIXES
You can prohibit the use of certain prefixes on your telephone.
When a prefix is forbidden, it becomes impossible to call
numbers that begin by this prefix.
Depending on the programmed prefixes, certain
numbers will no longer be accessible. For example,
if you programmed 06 as a forbidden prefix, it will not
be possible to call a number that begins by 06.
type.
or
- C
ALL BARRING
.