Initial Installation; Getting Started With The Telephone - SAGEMCOM C112 ECO User Manual

I
NITIAL INSTALLATION
C112 ECO /
The
to be connect to a SINGLE telephone line before use.
G
ETTING STARTED WITH THE TELEPHONE
Before making any connections, please refer to the
paragraph "Recommendations
instructions", page 4
• Click the spiral cord of the telephone set into its socket (1) on
the base side.
• Click the end of the line cord into its socket (2) and plug the
other end into the wall socket (3).
The telephone display will come on 1 minute after connection
and you can use your phone in the normal way.
C112 ECO
The
needing no batteries and just 1 minute of connection
to the telephone socket before use.
C130 ECO
telephone is designed
and
C130 ECO
/
is self-powered,
Adjustments to make before use
After installing your telephone, adjust the time and the contrast
safety
(if necessary). It is important to make these adjustments before
using your telephone.
Refer to paragraph "Modifying the flash duration (Key «R») ",
page 26, to set the flash duration.
Refer to paragraph "Modifying the date and time ", page 24, to
set the date and time of the telephone.
If you cannot see the screen display, refer to paragraph
"Adjusting the contrast ", page 25.
3
1
2
11