Table of Contents
Advertisement
Chapter 23 CF Card (V7 Only)
Backing up Memo Pad Data
When using the memo pad function, you can save memo pad data even when
the V7 series is turned off.
Operation on the V7 Series
When inserting the CF card and using the memo pad in the RUN mode, the
memo pad data is automatically stored on the CF card.
♦
When to Save:
The following explains when data should be written to the CF card:
Storage Target on a CF Card
The memo pad data is stored in the following folder on the CF card:
Storage target:
File name:
23-34
When selecting [SRAM/Clock Setting] from the [System Setting] menu and
checking [
Store Area for Memo Pad], the memo pad data is stored in SRAM
or a SRAM cassette even when inserting the CF card into the V7 series.
• When switching the memo pad display using the [Function: Plus Block],
[Function: Minus Block], or [Function: Block Call] switch
• When switching the screen
• When switching from the RUN mode to the [Main Menu] screen
\Memo
Memxxxx.bin (xxxx = 0 - 7: Memo pad page number)
You can convert the saved memo pad data (Memxxxx.bin) to a Bitmap file using the CF
Card Manager. For more information on the conversion, refer to page 23-50.
Advertisement
Table of Contents
