Table of Contents
Advertisement
• Transferring recipe data (
Using the macro command, you can read and write CSV files, which you
created on Windows, etc.
Manage data as a CSV file.
disc
RESET
• Transferring recipe data by the memory manager function (
page 23-27.)
You can also transfer recipe data by the V6 compatible memory manager
function. This is recommended if you are familiar with the existing methods
or if you use Memory Card Editor.
• Storing a pattern (Bitmap) file (
When using many patterns in a screen data file, the file size will be large. If
you use a CF card and save the pattern data to the CF card, you can refer to
patterns from the CF card and display them. This method saves the capacity
of the screen data.
• Storing JPEG data (
You can display JPEG data on the V7 series screen. Be sure to store the
JPEG data to be displayed on a CF card.
Read and write
data on a CF
card.
Production dataA
Production dataA-1
Production dataA-2
Production dataA-3
Production dataA-4
Production dataA-5
Production dataA-6
POWER
Refer to page 23-31.)
CF card
JPEG file
You can display the JPEG file stored
on the CF card on the screen.
Chapter 23 CF Card (V7 Only)
Refer to page 23-22.)
Data No.
5
SYSTEM
F1
5516
Set value1
545
F2
4450
Set value2
889
F3
5465
Set value3
65
F4
8845
Set value4
548
6548
Set value5
55
F5
7894
F6
5478
F7
V7 series
Refer to page 23-29.)
POWER
V7 series
RUN
STOP
PLC
You can also transfer
data from the CF card
to the PLC or write the
data from the PLC to
the CF card.
Refer to
SYSTEM
F1
F2
F3
F4
F5
F6
F7
23-3
23
Advertisement
Table of Contents
