Switches - Hakko Electronics Monitouch V Series Reference Manual

Chapter 19 JPEG Display (V7 Only)

Switches

There are 4 switches for JPEG display. To identify which video display item is
linked to a switch, use the same division number for the [Video Display] dialog
and for each [Switch].
Function
Plus block
Minus block
File calling (JP/ VD file) No.
CF Card Manager
When you complete setting the JPEG display, transfer the screen data file to the
V series. Then write the necessary data (JPEG file) to a CF card with the CF
card manager and insert the card into the V series.
When you complete writing the JPEG file to the CF card, insert the CF card into
the V series.
By [Transfer] of V-SFT
Screen data file
JPEG file
(within \V6W\JPEG)
By [CF Card Manager] of V-SFT
19-6
Attachment
setting
Call the JPEG file with the next number of the file
−
currently displayed.
Call the JPEG file with the previous number of
−
file currently displayed.
Call the JPEG file with the specified number.
* The [Function: File delete] switch is available only for video image JPEG file
(VDxxxxx.JPG).
For the procedure for writing a JPEG file using CF card manager, refer to "Chapter 23
CF Card (V7 Only)."
CF card
Contents
V7 series
POWER
Insert to V7
Target file
JPxxxxx.JPG
JPxxxxx.JPG
JPxxxxx.JPG
SYSTEM
F1
F2
Completed
F3
F4
F5
F6
F7