Group Master Output - SoundCraft Signature 16 User Manual

4.5: GROUP MASTER
16, 22, 22MTK User Manual
CONSOLE ROUTING > GROUP MASTER
The Group Master Outputs are derived from the post fade, post pan sum of input channels routed to
the corresponding Group busses (1-2 and 3-4 switches).
The Group Masters can contribute to the Master Left/Right Bus.
A useful example of this in practise might be where a group of related input channels (drum mics,
backing singers, and so on) are mixed relative to each other, then routed to GRP 1-2 (but not to
MST). If the Group Masters are then in turn routed to the Master Left/Right output you can adjust the
level of the whole group within the main mix by using the Group 1 and 2 faders.
4.5: GROUP MASTER ROUTING