Powering Down The System; Service User Menu - KVH Industries TracPhone F55 Installation Manual

Chapter 9: Setting Up the System

9.2 Powering Down the System

Press and hold the power button for a few seconds, while the handset display
shows the message shown below.
Let go of the button when the display shows the message below, and the
green LED on the front of the terminal starts flashing.
Note
Wait at least 5 seconds after a power down, before trying to power
up the F55 or F77 again.

9.3 Service User Menu

Before the system is ready to make the first call – some basic system
configuration is necessary.
The system configuration is carried out by the Service User, who has access to
all functionality in the BDU Unit.
The system configuration can be done via the handset or by running the
FleetCp program from a PC connected to the BDU.
See User Manual chapter 5, System Set-up from PC.
All configuration information is stored in the configuration module. It takes
approximately 10 sec. for the system to update and store configuration
information. When configuration information is changed or added wait min.
10 sec. before powering down the system.
44

Powering
Down

Thrane F77
Goodbye
Powering Down the System