Blue Soul head User Manual Contents Introduction How to use 1. Input stage with overdrive function 2. Tuner out 3. Equalizer GLOCKENKLANG 4. Effects loop 5. Volume control Eimterstr. 147 6. Power stage D-32049 Herford 7. Mains connection Tel +49-5221-51506 8.
Page 2
General instructions General instructions General instructions or email to: info@glockenklang.de Your Blue Soul head´s special features: This serves as a measure to ensure "Effect Loop" is a parallel loop with excellent customer service in the blending control from 0% till 100% on the future.
3.1 Equalizer with On Switch 1.1 Input A Jack Bass, Low, Mid, High and Treble controls serve Normal instrument input for active and passive to fine tune your sound or solve acoustical instruments. problems on stage. They will be activated by the On Switch.
7.1 A/C Connector with fuse Connector for A/C cord. The fuse is located in the 10.1 Loop / MP3 switch small compartment below. A spare fuse is included Activates the stereo MP3 In function of the Loop in the compartment, toot. The fuse is rated at 5A/slo Return instead of mono Return In.
Technical Data Solid state class D powered bass amplifier, 19" rack mountable, 2 rackspaces high. Inputs 1 Jack ¼” A for basses with normal output level, 3 M 1 Jack ¼” B for basses with higher output, additional pre-damping control, 4.7 M Equalization Bass +/- 15dB 60Hz...
Page 6
93/68/EEC and the low voltage Directive 73/23/EEC including amendment 93/68/EEC. This declaration of conformity of the European Communities is the result of an examination carried out by the Qualitiy Assurance Department of GLOCKENKLANG in accordance with European Standards EN 50081-1, EN 50082-1 and EN 60065 for low voltage.
Need help?
Do you have a question about the Blue Soul and is the answer not in the manual?
Questions and answers