Bass Art Classic Preamp User Manual Contents Introduction How to use 1. Input stage 2. Equalizer GLOCKENKLANG 3. Effects loop Eimterstr. 147 4. Volume control D-32049 Herford 5. Power stage 6. Mains connection +49-5221-51506 7. Line output +49-5221-108755 8. Balanced DI output http://www.glockenklang.de...
Page 2
Thank you for choosing the GLOCKENKLANG Handling Handling Handling Handling Bass Art Classic Preamplifier. You have Do not drop the amp. Do not use excessive purchased an exquisite piece of equipment, force when activating switches and dials. which was designed after the most modern technical aspects.
2.2 Mid Eq with On Switch 1.1 Line Driver In XLR-Connector Low Mid and High Mid semiparametrical Input for the optional instrument line driver. Is equalizer. The „dB“-controls raise and dip the connected to the switch-contact of the Input B frequencies, which are centered by the „KHz“- jack.
9.2 Loop Send Jack 6.1 A/C Connector with fuse To be connected to an effects units input. The level is Connector for A/C cord. The fuse is located in the small +4dB compartment below. A spare fuse is included in the compartment.
Need help?
Do you have a question about the Bass Art Classic and is the answer not in the manual?
Questions and answers