Blue Sky head User Manual Contents Introduction How to use 1. Input stage with overdrive function 2. Tuner out 3. Equalizer GLOCKENKLANG 4. Effects loop 5. Volume control Eimterstr. 147 6. Power stage D-32049 Herford 7. Mains connection Tel +49-5221-51506 8.
Page 2
General instructions General instructions General instructions This serves as a measure to ensure Your Blue Sky head´s special features: excellent customer service in the On the left side you can adjust the future. level of the “DI-Out” with a screw-driver!
1.1 Input A Jack 3.1 Equalizer with On Switch Normal instrument input for active and passive Bass, Low, Mid, Mid-KHz and Treble controls instruments. serve to fine tune your sound or solve acoustical problems on stage. They will be 1.2 Input B Jack activated by the On Switch.
10.1 Loop / MP3 switch 7.1 A/C Connector with fuse Activates the stereo MP3 In function of the Loop Connector for A/C cord. The fuse is located in the Return instead of mono Return In. small compartment below. A spare fuse is included in the compartment, toot.
Technical Data Solid state class D powered bass amplifier, 19" rack mountable, 2 rackspaces high. Inputs 1 Jack ¼” A for basses with normal output level, 3 M 1 Jack ¼” B for basses with higher output, additional pre-damping control, 4.7 M Equalization Bass +/- 15dB 60Hz...
Page 6
Defekte auf unsachgemäße Benutzung zurückzuführen sind. vom Fachhändler abgestempelt an die Firma Ebenfalls nicht vom Garantieanspruch erfaßt sind Defekte an GLOCKENKLANG unter der in §3 Ziffer 2 genannten Verschleißteilen, die auf normalen Verschleiß zurückzuführen Adresse zurücksenden. Es gilt das Datum des sind.
Page 7
93/68/EEC and the low voltage Directive 73/23/EEC including amendment 93/68/EEC. This declaration of conformity of the European Communities is the result of an examination carried out by the Qualitiy Assurance Department of GLOCKENKLANG in accordance with European Standards EN 50081-1, EN 50082-1 and EN 60065 for low voltage.
Need help?
Do you have a question about the Blue Sky and is the answer not in the manual?
Questions and answers