Table of Contents
Advertisement
2.)
Hot-Key Menu:
a. Outline:
b. The Description For Hot-Key Function :
Item
Volume
When the OSD is closed, press Left or Right
button will be Volume Hot-Key Function
3.)
OSD Message:
a. Outline:
b. The Description For OSD Message :
Item
Auto Config
1.) When Analog signal input, if User Press Hot-Key "Auto", will show this message, and the monitor do the auto
Please Wait
2.) When Digital signal input, without this OSD Message.
Input Not Supported When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor support range, will show this
message. This message will be flying.
Cable Not Connected 1.) Analog-Only Model : When the video cable is not connected, will show this message. This message will be
2.) Dual-Input Model : Dual-Input Model without this OSD Message.
No Signal
1.) Analog-Only Model : When the video cable is connected, but there is no active signal input, will show this
2.) Dual-Input Model : When the video cable is not connected, or the video cable is connected but there is no active
Operation
config function.
flying.
message, then enter power saving.
signal input, will show this message, then enter power saving.
Icon
Description
Volume of Audio adjustment. The Audio will be
Mute when volume=0.
Description
30
Adjustment
Reset
Range
Value
0-100
50
Advertisement
Table of Contents
