Table of Contents
Advertisement
Hot-Key Menu
a. Outline
b. The Description For Hot-Key Function
Item
When the OSD is closed, press Left or Right
Volume
button will be Volume Hot-Key Function
OSD Message
a. Outline
b. The Description For OSD Message
Item
1. When Analog signal input, if User Press Hot-Key "Auto", will show this message, and the
Auto Config
Please Wait
2. When Digital signal input, without this OSD Message.
Input Not
When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor support
Supported
range, will show this message. This message will be flying.
1. Analog-Only Model: When the video cable is not connected, will show this message. This
Cable Not
message will be flying.
Connected
2. Dual-Input Model: Dual-Input Model without this OSD Message.
1. Analog-Only Model: When the video cable is connected, but there is no active signal input,
No Signal
2.
Operation
monitor do the auto config function.
will show this message, then enter power saving.
Dual-Input Model: When the video cable is not connected, or the video cable is connected
but there is no active signal input, will show this message, then enter power saving.
Icon
Volume of Audio adjustment. The Audio will
be Mute when volume=0
Description
25
Description
Advertisement
Table of Contents
