Download  Print this page

Acer AL1711 User Manual

43.2cm(17”) tft color lcd monitor
Hide thumbs


Quick Links



FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS -------------------------------------- 2
SPECIAL NOTES ON LCD MONITORS ------------------- 3
BEFORE YOU OPERATE THE MONITOR --------------------- 3
FEATURES -------------------------------------------------------- 3
PACKING LIST --------------------------------------------------- 3
INSTALLATION INSTRUCTIONS --------------------------- 4
CONTROLS AND CONNECTORS -------------------------- 5
ADJUSTING THE VIEWING ANGLE ----------------------- 6
OPERATING INSTRUCTIONS ------------------------------------- 7
GENERAL INSTRUCTIONS ---------------------------------- 7
HOW TO ADJUST A SETTING ------------------------------ 9
ADJUSTING THE PICTURE ------------------------------ 9-10
PLUG AND PLAY ----------------------------------------------- 11
TECHNICAL SUPPORT(FAQ) -------------------------------- 12-13
APPENDIX ------------------------------------------------------------- 15
SPECIFICATIONS ------------------------------------------ 15-16
FACTORY PRESET TIMING TABLE --------------------- 17
CONNECTOR PIN ASSIGNMENT ------------------------ 17



  Also See for Acer AL1711

  Related Manuals for Acer AL1711

  Summary of Contents for Acer AL1711

  • Page 1: Table Of Contents

    TABLE OF CONTENTS FOR YOUR SAFETY -------------------------------------------------- 1 SAFETY PRECAUTIONS -------------------------------------- 2 SPECIAL NOTES ON LCD MONITORS ------------------- 3 BEFORE YOU OPERATE THE MONITOR --------------------- 3 FEATURES -------------------------------------------------------- 3 PACKING LIST --------------------------------------------------- 3 INSTALLATION INSTRUCTIONS --------------------------- 4 CONTROLS AND CONNECTORS -------------------------- 5 ADJUSTING THE VIEWING ANGLE ----------------------- 6 OPERATING INSTRUCTIONS ------------------------------------- 7 GENERAL INSTRUCTIONS ---------------------------------- 7...
  • Page 2: For Your Safety

    Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3: Safety Precautions

    PRECAUTIONS Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor.
  • Page 4: Special Notes On Lcd Monitors

    SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
  • Page 5: Installation Instructions

    INSTALLATION INSTRUCTIONS SWIVEL BASE IVEL BASE Install POWERCORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3.
  • Page 6: Controls And Connectors

    CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below. Connect one end of the 15-pin VGA cable to the back of the monitor and connect the other end to the computer’s D-Sub port. (Option-only for Audio model)Connect the audio cable between the monitor's audio input and the PC's audio output (green port).
  • Page 7: Adjusting The Viewing Angle

    • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle.
  • Page 8: Operating Instructions

    OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. •...
  • Page 9: Front Panel Control

    FRONT PANEL CONTROL • Power Button: Press this button to turn the monitor ON or OFF, And display the monitor’s state. • Power Indicator: Green — Power On mode. Orange — off mode • MENU / ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status.
  • Page 10: How To Adjust A Setting

    HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5.
  • Page 11 Warm Set the color temperature to warm white. Cool Set the color temperature to cool white. User /Red Adjusts Red/Green/Blue intensity. User/Green User/Blue English Traditional Chinese Deutsch Français Multi-language selection. Español Italiano Simplified Chinese Japanese H. Position Adjust the horizontal position of the OSD. V.
  • Page 12: Plug And Play

    HOW TO OPTIMIZE THE DOS-MODE PLUG AND PLAY Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
  • Page 13: Technical Support(Faq)

    TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play Picture is fuzzy Picture bounces or a wave pattern is present in the picture The power LED is ON (orange) but there’s no video or no picture.
  • Page 14 Screen image is not centered or sized properly. Picture has color defects (white does not look white) Horizontal or vertical disturbances on the screen CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture has not correct width.
  • Page 15: Error Message & Possible Solution

    ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. Check the signal -cable connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode ,set the computer to display mode given in the following table(See page 17).
  • Page 16: Appendix

    APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size Pixel pitch Brightness Contrast Viewable angle 140° (H) 130° (V) Response time 25 ms(Tr+Tf)Tr=9ms/Tf=16ms Video Input H-Frequency V-Frequency Display Colors Dot Clock Max. Resolution Plug & Play ® EPA ENERGY STAR ON Mode OFF Mode Input Connector...
  • Page 17 Switch External Controls: Functions Power Consumption ( Maximum ) Regulatory Compliance • Auto Adjust Key • </Volume • >/ Volume • Power Button • MENU/ Exit • Contrast • Brightness • Focus • Clock • H.Position • V.Position • Language •...
  • Page 18: Factory Preset Timing Table

    Preset Display Modes STANDARD RESOLUTION 640 × 480 640 × 480 800 × 600 SVGA 800 × 600 1024 × 768 VESA 1024 × 768 1024 × 768 1280 × 1024 SXGA 1280 × 1024 720 × 400 1024 × 768 1024 ×...