Table of Contents
Advertisement
2.)
Hot-Key Menu:
a. Outline:
b. The Description For Hot-Key Function :
Item
Volume When the OSD is closed, press Left or
Right button will be Volume Hot-Key
Function
3.)
OSD Message:
a. Outline:
b. The Description For OSD Message :
Item
Auto Config
1.) When Analog signal input, if User Press Hot-Key "Auto", will show this message, and the monitor do
Please Wait
2.) When Digital signal input, without this OSD Message.
Input Not
When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor support range, will show
Supported
this message. This message will be flying.
Cable Not
1.) Analog-Only Model : When the video cable is not connected, will show this message. This message
Connected
2.) Dual-Input Model : Dual-Input Model without this OSD Message.
No Signal
1.) Analog-Only Model : When the video cable is connected, but there is no active signal input, will show
2.) Dual-Input Model : When the video cable is not connected, or the video cable is connected but there is
Operation
the auto config function.
will be flying.
this message, then enter power saving.
no active signal input, will show this message, then enter power saving.
Icon
Description
Volume of Audio adjustment. The Audio will
be Mute when volume=0.
Description
30
Adjustment
Reset
Range
Value
0-100
50
Advertisement
Table of Contents
