Table of Contents
Advertisement
setup screen
To configure the swing settings
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
1. Set <Mode> in <Sequence setup> to
<Swing>.
The menu screen will switch to the
swing setting screen.
2. Select a swing setting mode.
• Pan swing : You can set the swing
monitoring only using the PAN
function.
• Tilt swing : You can set the swing
monitoring only using the Tilt
function.
• Pan & Tilt swing : You can set the swing monitoring only using both PAN and Tilt
functions.
3. Set <First preset> and <Second preset> to specify a swing range.
4. Set the moving speed and dwell time.
5. Press the [
The first preset, second preset, speed and dwell time will be saved in set mode.
6. Press the [
It performs the swing operation.
7. Press the [
The running swing will be stop.
To set a group
The group function enables you to group various presets before calling them in sequence.
Each group can contain up to 128 presets.
1. Set <Mode> in <Sequence setup> to
<Group>.
The menu screen will switch to the
group setting screen.
2. Select a group setting mode.
70_ setup screen
] button.
] button.
] button.
Advertisement
Table of Contents
