Table of Contents
Advertisement
Installing by wall mount
❖ Fix the installation base with the bracket
1. Fix the base with the bracket by turning it
clockwise.
2. As shown in the picture below, gently press
and lift up the handle of the hinged door on the
bottom of the installation base. Please refer to
the "Camera Wiring Interface Board" on page
17, connect the wires.
J
Do not connect the camera to a power outlet until the
installation is complete. Supplying power while the
installation is in progress may cause fire or damage
the product.
3. Connect the camera safety wire to the
installation base.
Knob
Safety Cable
English _35
Advertisement
Table of Contents
