Advertisement
MAINTENANCE
CAUTION :
Always be sure that the tool
is
switched off and unplugged before attempting t o perform
inspection or maintenance.
Replacing carbon brushes
I
Remove and check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean
and free to slip in
the
holders. Both
carbon brushes should be replaced
a t
the
same time. Use only Makita carbon brushes.
Use
a
screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure the
brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
13
Advertisement
