Total Rainfall; Rainfall Alert; Temperature; Reset - Oregon Scientific RGR126N User Manual

To display the record for a particular day:
• Press HIST to toggle
between daily rainfall
and rainfall history over
the past nine days. The
day of the record will be
displayed with a minus
(-) sign at the top left
hand corner. TODAy
means the record is for
the current day.
NOTE
Other sensors using the 433 MHz transmission
frequency may influence the rainfall reading. Please avoid
placing those sensors too close to the unit.

TOTAL RAINFALL

The total rainfall is displayed on the second line of
the display.
To display the commencing date of the total
rainfall record:
•
Press SINCE. The date will appear on the bottom
line of the display.
To clear the existing commencing date and reset it
to start again:
•
Press and hold SINCE. The total rainfall and today
rainfall will be reset to zero and then collect the
rainfall data starting from today.
RGR126N_UM_EN_R9.indd 9

RAINFALL ALERT

To set the rainfall alert value:
. Press and hold RAIN ALERT to enter setting mode.
2. Press UP or DOwN to toggle values.
3. Press RAIN ALERT to confirm.
alert function is enabled.
To deactivate rainfall alert:
•
The rainfall alert will be activated when the rainfall is
equal to or more than the rainfall alert value;
flash continuously.
•
To deactivate the rainfall alert, press RAIN ALERT
twice and wait for 8 seconds, or increase the rainfall
alert value.

TEMPERATURE

To toggle temperature unit:
•
Press between ˚C / ˚F.

RESET

Press RESET to return to the default settings.
NOTE
The main unit returns to default settings in each
battery replacement.
9
indicates rainfall
will
2014/9/17 6:14:16 PM