Rainfall; Rainfall History; Total Rainfall; Rainfall Alert - Oregon Scientific RGR202 User Manual

RAINFALL

Today's rainfall appears on the first line of the display.
Press IN / MM to toggle between inches and
millimeters.

RAINFALL HISTORY

The rainfall history is displayed on the second line of the
display. The main unit can record and store up to nine
days of rainfall.
To display the record for a particular day:
Press / HIST to toggle between daily rainfall and
rainfall history over the past nine days. The day of the
record will be displayed with a minus (-) sign at the top
left hand corner. "TODAY" means the record is for the
current day.
To clear the current day's rainfall record:
Press and hold SINCE for two seconds. Note that this
will also clear the total rainfall record.
CAUTION Other sensors using the 433 MHz
transmission frequency may influence the rainfall
reading. Please avoid placing those sensors too close
to the unit.

TOTAL RAINFALL

The total rainfall is displayed on the second line of the
display.
To display the commencing date of the total rainfall
record:
Press SINCE. The date will appear on the bottom line
of the display.
To clear the existing commencing date and reset it
to start again:
Press and hold SINCE. The total rainfall and today
rainfall will be reset to zero and the unit will start again
to collect the rainfall data.

RAINFALL ALERT

To set the rainfall alert value:
. Press and hold RAIN ALERT to enter setting mode.
2. Press / HIST or SEARCH / to toggle values.
3. Press RAIN ALERT to confirm.
alert function is enabled.
To deactivate rainfall alert:
• The rainfall alert will be activated when the rainfall is
equal to or more than the rainfall alert value;
LED indicator will flash continuously.
• To deactivate the rainfall alert, press RAIN ALERT
or increase the rainfall alert value.

TEMPERATURE

To toggle temperature unit:
Press °C / °F.
7
indicates rainfall
and