Table of Contents
Advertisement
To calibrate, CAL must be displayed in the mirror
compass windows. If CAL is not displayed, press and
Y b
hold
/
O
for several seconds or until CAL is
displayed.
The compass can be calibrated by driving the vehicle
in circles at 5 mph (8 km/h) or less until the display
reads a direction.
Compass Variance
The mirror is set to zone eight. If you do not live in zone
eight or drive out of the area, the compass variance
needs to be changed to the appropriate zone.
To adjust for compass variance:
1. Find the current location and variance zone number
on the following zone map.
3-38
Y b
2. Press and hold
/
number displays.
Y b
3. Press
/
O
repeatedly until the new zone
number displays. After you stop pressing the button,
the display shows a compass direction within a
few seconds.
O
until Z and/or a zone
Advertisement
Chapters
Table of Contents
