Miele KM 6366-1 Operating And Installation Instructions page 59

Disconnecting from the mains

Danger of electrical shock!
After disconnection, ensure the ap‐
pliance cannot be switched back on
inadvertently.
If the appliance's electric circuit is dis‐
connected from the mains supply, con‐
duct the allocation as follows, depend‐
ing on the installation:
Safety fuses
 Completely remove fuses.
Automatic circuit breakers
 Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
 Circuit breakers, type B or C: switch
the on-off switch from 1 (on) to
0 (off).
Residual current device (RCD)
 Switch the main switch from 1 (on) to
0 (off) or press the test button.
Electrical connection
Mains connection cable
The cooktop must be connected to the
electrical supply with a special connec‐
tion cable, type H 05 VV-F (PVC insula‐
ted) with a suitable diameter.
Please see the wiring diagram for con‐
nection.
See the data plate on the cooktop for
the correct voltage and frequency.
Replacing the mains connec‐
tion cable

Danger of electrical shock!
The mains connection cable must
only be replaced by a suitably quali‐
fied and competent person in ac‐
cordance with current local and na‐
tional safety regulations.
The earth lead must be connected to
the point marked .
If the mains cable needs to be re‐
placed, it must be replaced with a spe‐
cial connection cable, type H 05 VV-F
(PVC insulated), available from Miele.
The connection data is given on the da‐
ta plate.
59