Table of Contents
Advertisement
Available languages
Available languages
Installation
Instructions
CHECKLISTS
rT1 PRE-TEST CHECKLIST
D
E]
E]
F61
Remove all protective
film, if present, and any
stickers.
Check to be sure that all wiring is secure and
not pinched or in contact with moving parts.
Check level of appliance.
Check that the cooktop is properly grounded.
OPERATION CHECKLIST
r_
Remove all items from the top of the cooktop
surface.
r_
Turn on the power to the cooktop, Verify that
all surface burners operate properly,
Check that the circuit breaker is not tripped
nor the house fuse blown.
Check that conduit is securely connected
to
the junction
box.
r_
See troubleshooting
list.
NOTE TO ELECTRICIAN:
The power leads supplied
with this appliance
are
UL recognized
for connections
to larger gauge
household
wiring,
The insulation
of these leads
is rated at temperatures
much higher than
the temperature
rating
of household
wiring,
The current
carrying
capacity
of a conductor
is governed
by the wire gauge and also the
temperature
rating
of the insulation
around
the
wire.
NOTE: ALUMINUM WIRING
WARNING:
IMPROPER CONNECTION OF ALUMINUM
HOUSE WIRING TO THE COPPER LEADS CAN
RESULT IN A SERIOUS PROBLEM.
Splice copper wires to aluminum
wiring
using special connectors
designed
and UL
approved
for joining
copper to aluminum
and follow the manufacturer's
recommended
connector
procedure
closely.
NOTE: Wire used, location
and enclosure
of
splices, etc., must conform
to good wiring
practice
and local codes.
2O
Advertisement
Chapters
Table of Contents
