GEQuality Product Safety Information ..Operating Instru_tions JP200 Cookware Tips ....Surface Units ....JP201 JP202 Care and Cleaning Control I_obs ....Porcelain Enamel Cooktop ..Stainless Steel Cooktop ..Surface Units and Drip Pans ..Installation Instru_tions Electrical Connections ..
Page 2
IMPORTANT SAFETY INFORMATION. READALLINSTRUCTIONS BEFORE USING. A WARNING'! For your safe_, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of fife. SAFETY P RECAUtiONS When using electrical appflances, basic safety precautions should be followed, including the following: CAUTION:...
Page 3
A WARNING! For your safe_ the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. SAFETY P RECAUTIONS When using electrical appliances, basic safety precautions should be followed, including the following: •...
IMPORTANT SAFETY INFORMATION. READALLINSTRUCTIONS BEFORE USING. WARNING! SAFETY P RECAUTIONS • Do not immerse or soak tim removable .,..jl_rj_ • Do not store flammable materials near surthce units. Do not put them in a the cooktop. dishwasher • Kee I) hood and grease filtet_ clean to maintain good x>nfing and to a_oid •...
SURFACE COOKING U NITS Use proper pan size--This appfiance is equipped with different size surface units. Select cookware having flat bottoms large enough to cover the surface unit heating element. The use of undersized cookware will expose a portion of the surface unit to direct contact and may result in ignition of clothing.
Page 6
Usingthe cooktop. Throughout this manual, features and appearance may vary from your model. Cooktop Controls Yoursurfaceunits and controls are designed to XA]/en cooking in a quiet kitchen, give you an inhbite choice of heat settlbgs for may hear slight clicking sounds--an surface unit cooklbg, indication that tile heat settings...
Page 7
Right Wrong Use medium- or heavy-weight cookware. Aluminum cookware conducts heat faster than other metals. Cast- iron and coated cast-iron cookware are slow to absorb heat, but generally cook evenly at low to medium heat settings. Steel pans may cook une venly if not combined with other metals.
National Parts Center 1.800.626.2002 cleaner or polish. Always wipe the surli_ce in the direction of the grain. Follow the ge.com cleaner instructions fin" cleaning stainless steel stmfhce.
To clean the surface units, turn the control to the highest setting for a minute. The coils will bum off any soil. Surface Units and Drip Pans CAUTION Toreplace a surface unit: • Be sure all the controls are turned •...
Installation of the cooktop. Read these instructions completely and carefully. Before YouBegin NOTE TO INSTALLER--Be sure to leave these Read these instructions completely instructions with the Consumer. carefully. IMPORTANT--Save these instructions NOTE: Thisappliance must be properly grounded. for local inspector's use.
Page 11
Typicalinstallation location. #f installing the cooktc_over a GSM2100 dishwasher,go to the next page) ge.com Read these instructions completely and carefully, Dimensions and Clearances 15 1_g" E:16 W" Max._ 30" Min. 1_4"Min. C'@SrsRce Unit and cutout dimensions This counter unR must be installed...
Page 12
• _'hen installing over a dishwashei; (ooktop models ]P2OO,JP20] andJP202 are only Thefollowingm&imumclearancesmustbe approved fiw installation over GE Undei_ink maintaine& Dishwasher model (;SM2100, Install the dishwasher using the separate ii_stallafion • 3:_" inii]ilnuln clearance between tile front...
Page 13
They are included with some Max. distance of 7" when installing over GSM2100dishwasher models, or can be ordered, GE model Suggested mounting of an approved junction box. number WB2K5328. • To attach the cooktop to the counter;...
Before YouCall ForService... Troubleshooting -tips Save time and money! Review the chart on this page first and you may not need to carl for service. Problem Possible Causes What To Do Surface units not surface milts * _._]th the controls off, check to make sure...
Page 15
Proof of the original purchase To schedule service, on-line, 24 hours a day, vis# us date is needed to obtain service at ge.com, or call 800.GE.CARES (800.432.2737).Please under the warranty. have serial number and model number available when cafling for service.
Caution must be exercised, since improper servicing may cause unsafe operation. ContactUs ge.com If you are not satisiied with the service you receive fl'om GE, contact us on our _'ebsite with all the details including your phone wIJte to: General Manager;...
Need help?
Do you have a question about the JP200 and is the answer not in the manual?
Questions and answers