Setting The Clock; Changing Between Continuous Bake Or 12-Hour; Energy Saving Features; Changing Oven Temperature Display (P Or C°) - Frigidaire FGEF3030PFB Use & Care Manual

Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
set
1. Press dock once (do not hold pad down).
2. Within 5 seconds, press and hold the A or V until
the correct time of day appears in the display,
The time of day cannot be changed when the oven or
self-clean is active,
Changing between continuous bake
setting or 12=Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
Changing to continuous bake setting:
1. Press and hold timer down for 5 seconds until a tone
on, off
sounds, "m m hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the continuous bake setting, press timer
on. off
and hold for 5 seconds until a tone sounds.
"12hr" will appear in display indicating that the control
has returned to the 12-Hour Energy Saving feature.
Changing between continuous bake or the 12-Hour Energy
saving mode does not change how the cooktop controls
Changing temperature display (°F or °C)
The electronic oven control is set to display in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to display °C (Celsius) or
from °C to °F (control should not be set for Bake or
Self=clean when setting this feature):
1. Press broil . " "appears in the display.
2. Press and hold the A until "HI" appears in the
display.
3. Press and hold breit until °F or °C appears in the
display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
The temperature display feature cannot be changed
when the oven or self-clean is active.
Setting a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold start After 7
time "
seconds, the control will beep once. This will block the
controls from sounding when a pad is pressed. To return
the sound, press and hold start again for 7 seconds until
time
the control beeps once.
operate.