Setting Bake - Frigidaire FGEF3030PFB Use & Care Manual

Setting bake
The oven may be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C). The factory preset
automatic bake temperature is 350°F (177°C).
To set bake
I. Press bake." -- ----" appears in the display.
.
.
Within 5 seconds, press the A or V • The display
will show "350°F (177°C). '' By pressing and holding
the A or V, the temperature may be adjusted in
5°F increments (1°C if the control is set to display
Celsius).
As soon as the A or V keypad is released, the
oven will begin heating to the selected temperature.
When the displayed temperature reaches the desired
baking temperature, the preheat indicator light will turn
OFF. The control will beep 3 times as a reminder.
4. To stop bake, press cancel.
To change the oven temperature after bake has
started
1. Press bake. Visually check the bake temperature at
this time.
2. Press the A or V pad to increase or decrease the
set temperature to the desired new oven temperature.
For best baking results
- Fully preheat the oven before baking items like cookies,
biscuits and breads.
- When using any single rack, position the rack so that the
food is in the center of the oven.
- For best results when baking cakes using 2 oven racks,
place racks in positions 2 and 5 (Figure 1).
- When baking using 2 oven racks, position cookware as
shown in Figure 2. Allow at least 2 inches (5 cm) of
space between cookware for proper air circulation.
Dark or dull pans absorb more heat than shiny bakeware,
resulting in dark or overbrowning of foods. It may be
necessary to reduce the oven temperature or cook time
to prevent overbrowning of some foods. Dark pans are
recommended for pies. Shiny pans are recommended for
cakes, cookies and muffins.
• A short time after starting bake the PREHEAT indicator
light will turn OFF, indicating your oven has reached
the set baking temperature. The control will sound 3
beeps as a reminder the oven is ready.
• The OVEN indicator light on the oven contro! display will
turn ON and OFF while using the Bake feature. This is
normal and indicates that the oven elements are cycling
to maintain the selected baking temperature.
Fig. i
Fig. 2