Programming Mode - Delfi DelfiScan C85 Quick Reference Manual

Programming Mode

when the reader is in Programming Mode.
INDICATION
Label Programming
Mode Entry
Label Programming
Mode Rejection of
Label
Label Programming
Mode Acceptance of
Partial Label
Label Programming
Mode Acceptance of
Programming
Label Programming
Mode Cancel Item
Entry
Quick Reference Guide
- The following indications ONLY occur
DESCRIPTION
A valid programming label
has been scanned.
A label has been rejected.
In cases where multiple
labels must be scanned to
program one feature, this
indication acknowledges
each portion as it is suc-
cessfully scanned.
Configuration option(s)
have been successfully pro-
grammed via labels and
the reader has exited Pro-
gramming Mode.
Cancel label has been
scanned.
LED and Beeper Indications
LED
LED blinks contin- Reader sounds four
uously low frequency beeps.
Reader sounds three
times at lowest fre-
N/A
quency and current
volume.
Reader sounds one
short beep at highest
N/A
frequency and cur-
rent volume.
Reader sounds one
high frequency beep
N/A and 4 low frequency
beeps followed by
reset beeps.
Reader sounds two
times at low fre-
N/A
quency and current
volume.
BEEPER
25