Electrolux EI32AF80QSA Use And Care Manual page 8

Table of Contents

Advertisement

To Level
The
Freezer:
While unit is lyingon its back, note the
location of the four (4) leg levelers installed
at each corner. These leg levelers will be
iiiiiiiiiiiiiiiii_ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iiiiiiiiiiiiiiiiiiiii_ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iiiiiiiiiiiiiiiiiiiiiiii_ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iiiiiiiiiiiiiiiiiiiiiiiiiii_ii:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i
iii
HHHHHHHHHHHHHHHHH_
_
HHHHHHHHHHHHHHHHH_
_
HHHHHHHHHHHHHHHHH_'
_
HHHHHHHHHHHHHHHHHHH
_
HHHHHHHHHHHHHHHHHHH_
_
HHHHHHHHHHHHHHHHHHH'
_
HHHHHHHHHHHHHHHHHHHH_
_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii::
used to level the freezer and to adjust the
height. Use a carpenter's level to level the
freezer from front to back and side to side.
Adjust the plastic leveling feet in front, 1/2
bubble higher, so that the door closes
easily when left halfway open.
Plastic
Leveling Feet (
c_
Leveling
Instructions
For
Matching
Tall Refrigerator
/ Tall
Freezer
Pair:
Level door of first unit using all four
levelers and slide unit into place.
Recheck for levelness and adjust
if necessary.
Measure distance from floor to
bottom of door on first unit. Adjust
and level second unit so door
height matches.
Leg Level Adjustments:
One full turn of all four leg levelers will
raise door 5/32".
Slide second unit into place leaving a
minimum gap of 3/16" between units
for door swing clearance.
This last step may require at least
one extraction of the second
unit to properly align units in a "built-
in" application.
Leveling
Door
with
Adjustable
Hinge
Use the lower hinge adjustment to fine
tune the door height and for final cabinet
spacing. Use a 7/16" socket or wrench
to adjust the screw at the bottom of the
lower hinge.
Adjusting
Doors
For Matching
Tall
Refrigerator
/ Tall Freezer
Pair
The doors may also be adjusted side to
side with the slotted hinge for aligning
the doors parallel to each other. Loosen
the two bolts with a 3/8" wrench and one
screw with a Phillips screwdriver. Shift
the doors until parallel, then retighten the
screws securely. (See illustration below.)
Lower
Hinge
Adjustment
For
Leveling
The
Doors
Of The
Matching
Tall Refrigerator
/ Tall
Freezer
Pair
To level the doors using the adjustable
lower hinge (some models):
1.
If the refrigerator door is lower than
the freezer door, raise the refrigerator
door by turning the adjustment screw
clockwise using a 7/16" socket
wrench. (See illustration below.)
2.
If the freezer door is lower than the
refrigerator door, raise the freezer
door by turning the adjustment screw
clockwise using a 7/16" socket
wrench. (See illustration below.)
S!otted Hinge
ir_! _
I
Adjustmen!
ui_r

Advertisement

Table of Contents
loading

Table of Contents