Kenmore 796.41282310 Use & Care Manual page 20

CYCLE MODiFiER BUTTONS
Each cycle has default settings that are selected
automatically. You may also customize these settings
using the cycle modifier buttons. Press the button for the
desired modifier until the indicator light for the desired
value is lit. The washer automatically adjusts the water
level for the type and size of wash toad for best results
and maximum emciency. Due to the high-emciency
nature of this product, water levels may be much lower
than expected. This is normal operation and cleaning/
rinsing performance will not be compromised.
NOTE: To protect your garments, not every wash tem-
perature, spin speed, soil level, or option is available
with every cycle. A chime will sound and the LED will
not light if a selection is not allowed.
O
WASH TEMP
Wash Temp selects the wash and rinse temperature
combination for the selected cycle. Press the Wash
Temp button until the indicator light for the desired
setting is lit.
° Your washer features a heating element to boost the hot
water temperature for Extra Hot settings. This provides
improved wash performance at normal water heater
settings.
° Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
° Warm rinses are regulated at approximately 86°F
(30°C).
° Warm rinses leave the clothes dryer than cold rinses_ but
will result in increased energy consumption and greater
wrinkling of clothes.
° Cold rinses use Jessenergy. The actual rinse temperature
depends on the temperature of the cold
water at
the
faucet.
O SPIN SPEED
O
O
2O
Higher spin speeds extract more water from clothes,
reducing drying time and saving energy.
Press the SPIN SPEED button until the desired speed
is selected. Some fabrics, such as delicates, require
a slower spin speed. To protect your clothing, not all
spin speeds are available for all cycles.
The Drain & Spln cycle:
1. Press the POWER button to turn ON the washen
2. Press the SPIN SPEED button to select the desired
spin speed. For drain only, select the NO SPIN
option.
3. Press the START/PAUSE button. The water will
drain and the clothes will tumble before the spin
routine begins.
SOIL LEVEL
Adjusting the soil level setting will modify the cycle
to allow more time for heavily soiled clothes or tess
time for lightly soiled clothes. Press the SOIL LEVEL
button until the desired soil level is selected.
CHIME
Press repeatedly to adjust the volume of the chime
and keypad tones. You may turn the end-of-cycle
chime and keypad tones ON or OFF with the CHIME
button.