Table of Contents
Advertisement
Available languages
Available languages
CONTROL PANEL AND FEATURES
cool
warm
toad size
wash temp
all cold rinses
CENTENNIAL
commerda[
technology
t
bulky/
normal
_t_a_S_
drain
&spin
&spin
=
pause/u.lo_k
[.
_
Not all features
and options
are available on all models.
Appearance
may vary.
regular
soil level
rinse
w_tbfabdc softener
.J
J
O
LOAD SIZE
Select
the setting
most suitable
for your load. Small will add
a low amount
of water for smaller loads and Super will add
the most amount
of water for large or bulky loads. Items need
to move freely. Tightly
packing
can lead to poor cleaning
performance,
and may increase wrinkling
and tangling.
WASH TEMP
Temperature
senses and maintains
uniform
water
temperatures
by regulating
incoming
hot and cold water.
Select
a wash temperature
based on the type of fabric and soils
being washed.
For best results
and following
the garment label
instructions,
use the warmest
wash water safe for your fabric.
[]
On some models
and cycles, warm and hot water may be
cooler than your previous
washer.
[]
Even in a cold and cool water wash, some warm water may
be added
to the washer to maintain
a minimum
temperature.
WASH
CYCLE
KNOB
Use the Wash Cycle knob to select
cycles
on your washer.
Knob does not advance
during the progress
of the cycle, see
cycle status lights for each stage of the process.
See "Cycle
Guide"
for detailed
descriptions
of cycles.
O
SOIL LEVEL
For most loads, select the most suitable setting for your load,
For heavily soiled and sturdy fabrics, select Heavy Soil Level
for more wash time, if needed, For lightly soiled and delicate
fabrics, select Light Soil Level for less wash time, if needed,
Lighter soil level setting will help reduce tangling and wrinkling,
O
OPTIONS
The following options may be added to most cycles,
ONE
RINSE
This option is used to limit a cycle to one rinse,
EXTRA
RINSE
This option can be used to automatically add a second rinse
to most cycles,
ONE
RINSE
with
FABRIC
SOFTENER
This option must be selected if using fabric softener during
a cycle. It ensures that fabric softener is added at the correct
time in the rinse for even distribution.
0
0
EXTRA
RINSE
with
FABRIC
SOFTENER
This option turns on both the Fabric Softener and the
Extra Rinse options.
STARTIPAUSEIUNLOCK
BUTTON
Press to start the selected cycle; press again to pause the cycle
and unlock the lid,
NOTE:
If the washer
is spinning,
it may take several
minutes
to
unlock the lid. Press and hold for 3 seconds
to cancel a cycle.
CYCLE STATUS LIGHTS
fill
wash
dose
spin
done
_id locked
progress
(_
(_
(_
(_
(_
(_
The Cycle Status Lights show the progress
of a cycle. At each
stage of the process,
you may notice sounds
or pauses
that are
different
from traditional
washers.
Fi LL
When the START/Pause/Unlock
button
is pressed,
the
washer
will fill to the selected
water level. If the lid is closed
when the washer
is done filling the lid will lock and the
washer
will begin operation.
If the lid is open when the water stops entering
the washer,
the cycle will not begin until the lid has been closed
and the
START/Pause/Unlock
button
is pressed.
If the cycle has not
been started
within 10 minutes
of the water filling the washer,
the washer
will pump out the water.
NOTE:
Avoid opening
lid during
sensing
phase. The sensing
process
will start over when the washer
is restarted.
The
sensing
light may also come on during the Soak and Wash
portions
of the cycle. This is normal. To restart the washer
after the lid has been opened
press START.
WASH
You will hear the agitator
moving
the load. The motor sounds
may change at different
stages
in the cycle. The wash time is
determined
by the selected
soil level.
4
Hide quick links:
Advertisement
Table of Contents
