Makita PV7001C Instruction Manual page 8

ASSEMBLY
1
2
1. Cover
2. Side grip
1
2
1. Cover
2. Side grip
8
• Electronic constant speed control
Possible to get fine finish, because the rotating speed is
kept constantly even under the loaded condition.
• Soft start feature
Soft start because of suppressed starting shock.
High-Low speed setting button
003444
The tool speed can be changed instantly while the tool is
running. Depress the "I" position for lowest speed and
depress "II" position for a given number setting.
The tool speed cannot be changed when the button is in "I"
position, even if you turn the speed adjusting dial. When you
turn the speed adjusting dial, always be sure that the button
is depressed in "II" position.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (auxiliary handle) & cover
003412
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Install the cover, then screw the side grip on the tool
securely. The side grip and the cover can be installed on
either side of the tool.
003413