Using The Memory Function; Storing A Measurement; Recalling A Measurement; Clearing Memory - Fluke 1508 User Manual

Figure 9. Using the Compare Function

Using the Memory Function

You can store up to 19 insulation or earth-bond
measurements on the Tester. The measurements are
stored in a last in, first out format. If more than 19
measurements are stored, the earliest will be deleted to
make room for the latest.

Storing a Measurement

M
Press the

Recalling a Measurement

Press the blue button and then the
last saved measurement. The measurement will be
displayed on the primary display and the stored data count
will be displayed on the secondary display. Press the blue
button and the
saved result. You can repeat this step until the displayed
stored data count is one. The next displayed
measurement will be the newest. Press the
exit the recall display.

Clearing Memory

Press the blue button and then the
bbv11f.eps primary display will show clr?. Press the blue button and
L
then the
Using the Memory Function
button to save the last measurement taken.
M
M
button again to recall the previous
L
button again to clear all memory locations.
Insulation Testers
button to recall the
M
button to
button. The
17