Preparation For Threading; Setting Up The Thread Guide Holder - Singer 14CG754 Operator's Manual

POLARIZED PLUG INFORMATION (FOR U.S,A, & CANADA ONLY)
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of
electric shock, this piug is intended to fit in a polarized outlet only one way. if the plug
does not fit fully in the outtet, reverse the plug. ff it stil! does not fit, contact a qualified
electrician to install the proper outlet. Do not modify the plug in any way
Warning:
Be sure that the electrical voltage of the electric outlel (waii receptacle} is the same as the rated
vomtage of the motor.
Handle the foot co_trolier with care and avoid dropping it on the floor Be sure not to place
anything on top of it when not in use.
Disconnect the power line plug from the e_ectdc outJet wt_en changing needies, presser feet o_'
throat plates, or when: ieeving the machine unattended_ This eliminates the possibiiity ol starti_g
the machiRe by accid:entaliy pressing the controLier
Setting Up the Thread Guide Holder
• _is machine is shipped with the thread guide holder
in the iowered position,
• Fully extend the thread guide holder
* The two joints on the telescope wifl click into p_ace
when they are correctly positioned.
" Ce_ter the thread guides above the spoo_ pins.
• P_ace thread over the cone adapters on the spool
pins,
Note: _f the machir_e s threaded_ straighten the
threads to prevent tangiingo
10