Protection System - Kenmore 116.31140 Use & Care Manual

ATTACHMENT USE TABLE
CLEANING AREA v"
=
Applicable
Between
ATTACHMENT
Furniture _ Cushions_ Drapes _ Stairs Floors
Carpe| Bare
CREVICE TOOL
t/ v" t/ v"
COMBINATIONBRUSH
PETHANDIMATE
Always clean attachments before using on fabrics.
_;Use the combination brush without the brush for greater suction on furniture cushionsor stairs.
Use combination brush with brush for cleaning loosesurfaces such as drapes.
MOTOR PROTECTION SYSTEM
Thermat Protector - Suction Motor
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner suction motor.
if a dog prevents the normal flow of air
to the motor, the thermal protector turns
the motor off automatically. This allows
the motor to cool in order to prevent
possible damage to the vacuum cleaner.
To reset thermal protectors: Turn the
vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum
cleaner to cool and the thermal
protectors to reset.
_CAUTION
Always return the vacuum cleaner to the
upright position before using the hose
and attachments. Failure to do so may
result in overheating of the agitator
motors and can cause the thermal
protectors to trip.
Check for and remove clogs, and replace
bog if necessary. See REMOVING CLOGS
Section (Page 19-20). Also check and
replace any clogged filters. Wait
approximately 50 minutes before
restarting vacuum cleaner.
- 12 -