Table of Contents
Advertisement
Before Setting
Oven Controls
7
Arranging,
Removing, and Replacing Flat or Offset Oven
Racks
•
To Arrange: Always arrange the oven racks when the oven
is cool (prior to operating the oven).
•
To Remove: Pull the oven rack straight forward until it
reaches the stop position. Lift up front of oven rack slightly
and slide out.
•
To Replace: Place the oven rack on the rack guides on the
oven walls. Tilt the front of the rack upward slightly and
slide the oven rack back into place.
Types of Oven
Racks
Flat Oven Rack
Flat oven racks (or the fiat handle oven rack) may be used for
most cooking needs and may be placed in most oven rack posi-
tions.
Figure 5:
Flat oven rack
Figure 6:
Flat handle oven rack
Offset Oven Rack (Some Models)
The offset oven rack provides additional stepdown positions
from the standard fiat rack design. The offset design positions
the base of the rack about 1/2 of a rack position lower than the
fiat rack and may be used in most oven rack positions.
Figure 7:
Offset oven rack
Luxury Glide
TM
Oven
Racks
The fully extendable Luxury-Glide
TM
rack makes food prepara-
tion easier. This oven rack has glide tracks that allow the rack to
be pulled away from the oven without rubbing the sides of the
oven wall.
Figure 8:
Luxury Glide
TM
rack showing glide stop
To install the Luxu_-Glide
TM
oven racks:
Always use potholders or oven mitts when removing food or
adjusting the oven racks. Wait until the oven in completely
cooled if possible. Oven racks may be very hot and may cause
burns.
Always remove/replace
the oven racks before turning on the
oven (when the oven is cool).
The Luxury-Glide
TM
rack installs like all other oven racks.
Before sliding the rack all the way in, lift the back of the rack
slightly to set the rack past the stop position. Slide the rack all
the way in so that the back of the rack stops by touching the
vertical support of the ladder rack. The glide portion of the rack
can be easily pulled in and out in this position while the rack's
frame remains locked into the ladder supports. This allows
bakeware to remain in place on the rack and slide out easily to
check food items without removing them from the oven.
When
setting
the rack in,
the glide stop must be
behind the rack support
in
order
for the rack to be
properly
installed
Figure 9:
Luxury Glide
TM
rack install
IMPORTANT!
Remove all oven racks before starting a self-
clean cycle. If oven racks are left inside the oven during a
cleaning cycle, the slide ability of the Luxury-Glide
TM
oven racks
may be damaged and all of the oven racks will lose their shiny
finish.
IMPORTANT!
To prevent possible damage to the oven, do not
attempt to close the oven door until all the oven racks are fully
positioned back inside the oven cavity.
Clean oven racks according to the instructions provided in the
Care & Cleaning section.
Hide quick links:
Advertisement
Table of Contents
