Epcom S04 Quick Operation Manual page 15

SERIES SERIES
included when right-clicking mouse on this camera.
Main/Aux Output Switching
When the VGA output is configured as the main output, you can perform the following operation
to switch to CVBS output as the main output.
Steps:
1. In the live view mode, select the Aux Monitor from the toolbar on the bottom or use the
mouse wheel to double-click on the VGA output screen, and the following message box pops
up:
2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or
click Cancel to cancel the operation.
3. On the aux output monitor, you can do some basic operation on the live view mode for the
Aux output, including recording, live view, image settings, switch to main monitor, and no
operation is allowed for the main output.
4. To switch to the main vide output, click the Main Monitor icon on the toolbar and click Yes on
the pop-up message box.
You can select the Menu Output Mode to Auto, Main CVBS or VGA
underMenu>Configuration>>General>More Settings.
Record
Move the mouse to the bottom of the screen in live view mode, and select the
to configure the normal recording or motion detection recording of all chnanels.
In the pop-up message box, clickYesto start the recording of all channels.
15
POWERED BY
or icon