Epcom S04 Quick Operation Manual page 14

POWERED BY
Using the Mouse in Live View
In the live view mode, right click on the screen or move the mouse to the bottom of the screen, the
main menu button andthe live view toolbar appears:
Icon Name
Main Menu
Single
Screen
Multi-screen
Normal
Record
Motion
Detection
Record
All-day
Playback
Aux Monitor
Output Mode
Previous
Screen
Next Screen
Start/Stop
/
Auto-switch
/
Lock/Unlock
If the corresponding camera supports intelligent function, the Reboot Intelligence option is
14
Table 4Mouse Operation in Live View
Description
Enter the main menu of the system.
Switch to the single full screen live view mode.
Switch to multi-screen live view mode.
The multi-screen icon varies according to the device
models.
Start all-day normal recording for all
Start motion detection recording for all
Play back the record video.
Switch to the auxiliary output mode and the
operation for the main output is disabled.
If you enter Aux monitor mode and the Aux monitor
is not connected, the mouse operation is disabled.
You can use the mouse wheel to double-click for
three times to switch back to the main video output.
Set the video output mode to Standard, Bright,
Gentle or Vivid.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
The dwell time of the live view configuration must be
set before using Start Auto-switch.
Lock/unlock the toolbar.
channels.
channels.
SERIES SERIES