Advertisement
Screwdriving operation
Place the point of the driver bit in the screw head and apply pressure to the tool. Start
the tool.
Release
the trigger
as
soon
as
the stopper touches the workpiece. The electric
brake will then stop the tool immediately.
NOTE :
Use the proper bit for the head of the screw that you wish to use.
Make sure that the driver bit i s inserted straight in the screw head, or the screw and/or
If you continue driving the screw after the screw is fully seated, the screw and/or bit
bit may be damaged.
may be damaged.
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work
i s
prolonged.
Wait 20-30
seconds before resuming operation.
MAINTENANCE
CAUTION
:
Always be sure that the tool i s switched off and the battery cartridge i s removed before
attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment
should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
9
Advertisement
