Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when temperature is BELOW 10°C
(5OOF)
or ABOVE
4OoC
(104OF).
2.
Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do not allow anything t o cover or clog the charger vents.
4. Always cover the battery terminals with the battery cover when the battery
5.
A battery short can cause a large current flow, overheating, possible burns
receptacle.
cartridge is not used.
and even a breakdown.
(1) Do
not touch the terminals
with
any conductive material.
(2)
Avoid storing battery cartridge in a container
with
other metal objects such
(3)
Do n o t expose battery cartridge t o water or rain.
ture may reach or exceed 5OoC
(122OF).
completely worn out. The battery cartridge can explode
in
a fire.
as nails, coins, etc.
6. Do
n o t store the tool and Battery Cartridge in locations where the tempera-
7. Do
not incinerate the Battery Cartridge even if it is severely damaged or is
ADDITIONAL SAFETY RULES
1. Be aware that this tool is always in an operating condition, because
it
does
2. Always be sure you have a firm footing.
3.
Hold the tool firmly.
4. Keep hands away from rotating parts.
5. When driving into walls, floors or wherever "live"
electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold
the
tool
only by the insulated grasping surfaces t o prevent electric shock
if you drive into a "live"
wire.
6. Do not touch the bit or the workpiece immediately after operation; they may
be extremely hot and could burn your skin.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
SAVE THESE INSTRUCTIONS.
5
Advertisement
