Switching On The Appliance And Setting The Thermostat - Haier HBR-1301AA User Manual

o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.

Switching on the appliance and setting the thermostat

You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat control knob is located on
the right hand side of the fridge.
o The thermostat automatically regulates the temperature inside of
the fridge, depending on what number you have turned the
thermostat control knob to:-
o Position <0> means that the appliance will not cool. However
the light will still function.
o Position <1> will give you a higher temperature inside of the
fridge.
o Position <7> will give you a lower temperature inside of the
fridge.
o Ideally the thermostat should be set to a position of between
<3> to <4>.
o Your refrigerator can maintain a temperature of between 4 – 6
degrees centigrade.
o IMPORTANT: The ambient temperature of the room,
the temperature of the food and the amount of food that
has been placed in the appliance and how often the door
is opened, will all affect the temperature being
maintained by the appliance.
o On the maximum setting (position <7>), your fridge will work
harder to maintain a lower temperature. There is no need to run
your appliance on this setting for prolonged periods and you
should return the thermostat knob to between <3> to <4>.
11