Installation; Positioning Your Appliance - Haier HRF-628I 6 Series User Manual

4. Installation

Positioning Your Appliance

Choosing the Right Location
This appliance should be installed in a room that is dry
and well ventilated. To provide adequate ventilation, make
sure the refrigerator is at least 10 cm clear on all sides
from kitchen cabinetry (Fig.4-1). Any units placed above
the appliance must be clear by 10
ventilation.
must be left for opening the doors and removing the shelves
(Fig.4-2).
This appliance should be at least 100 mm from any electric or
gas cooker and 300 mm from any coal or oil stove. If this is not
possible, make sure that appropriate insulation is used.
Avoid exposing the appliance to direct sunlight, and sources
of heat (such as radiators, heaters or cookers).
If this appliance is situated in a cold environment (such as
consistent and this may damage foods. A consistent ambient
temperature of 10 °C or above is recommended.
cm t
ArtNo.600-0034 - Clearances
All dimensions in cm
15
10cm
10
10
moulding
(Doors omitted for clarity)
Fig.4-1
Fig.4-2
Fig.4-3
Toe